Focusun new Directly Evaperate Aluminum Plate Ice Machine Made in China 10000kg per day

Focusun 3000kgs per day Plate Ice Making Machine   Plate ice introduction: Plate ice is a kind of irregular sheet ice with about 40×40mm~80×80mm in size, and 10 mm~15mm in thickness. The thickness can be adjusted according to ice-making time with the maximum gauge being 25mm. Plate ice is a kind of thick and transparent ice which has good air permeability and a long shelf life.

Application fields: Plate ice is usually used for ice storage systems and is also applied to concrete mixing plants, chemical plants, mines, fresh vegetables, fishing and aquatic insulations.  

Ice making process introduction:

When the refrigeration system begins operating normally, the water in the tank below is transported from the cold water tank to the cold water sprinkler by the cold water pump. It is then evenly sprinkled on the surface of the Evaporator. Through the cycle working of the refrigerant, some water is created into plate ice, while the water which does not become ice returns to the cold water tank below and waits for the next water cycle. After a period of time the water cycle and refrigeration stops and the water and overheating refrigerants gas begin a heat exchange with the plate ice at the same time. The plate ice then loses adhesive force and the ice drops into the ice crushing gadget due to gravity. After the ice is off the water temperature becomes low and it returns into the water sink waiting the next cycle.

  Plate Ice Machine features: By using water and heat Fluorine, the whole ice off process only needs 120 seconds. Ice making time adopts time control, which can be set to adjust the thickness of the ice. It conforms to the sanitary security requirements by adopting stainless steel SUS304, aluminum alloy plate chip evaporator. Ice dump and water drainage function makes ice more clean and transparent. It is convenient to install and maintain because of its modular equipment. All modules are proper for container shipping. Large capacity plate ice machine technical parameter

Model	Capacity	Refrigerant	Electricity consumption	Installment power	Operating weight	Dimension
--	Ton/D	--	Kw	Kw	Kg	mm
FIP-80	8	R22/R404A	29.25	35	Unit:670	1200×800×1650
					Evaporator:1356	2200×1400×2200
					Cooling tower:540	1500×2205
FIP-100	10	R22/R404A	39.07	48	Unit:1150	1600×1200×1800
					Evaporator:1460	2200×1700×2200
					Cooling tower:670	2000×2410
FIP-120	12	R22/R404A	44.47	55	Unit:1250	1600×1250×1800
					Evaporato:1560	2200×1900×2200
					Cooling tower:670	2000×2410
FIP-160	16	R22/R404A	56.35	70	Unit:1450	1750×1250×1800
					Evaporato:1760	2200×2100×2200
					Cooling tower:1120	2175×2565
FIP-200	20	R22/R404A	84.00	100	Unit:2150	2450×1600×1800
					Evaporato:2680	3800×2200×2450
					Cooling tower:1300	2650×2565
FIP-240	24	R22/R404A	100.10	125	Unit:2450	2700×2200×2200
					Evaporato:3250	4500×2200×2450
					Cooling tower:1300	2650×2565
FIP-320	32	R22/R404A	124.00	150	Unit:2550	2700×2200×2200
					Evaporato:3760	3200×2200×2450
					Cooling tower:1630	3050×2780
FIP-400	42	R22/R404A	154.70	200	Unit:2850	3200×2200×2200
					Evaporato:5460	3800×2200×2450
					Cooling tower:2730	3300×2785
FIP-480	48	R22/R404A	189.10	230	Unit:3210	3200×2200×2200
					Evaporato:5040	3200×2200×2450
					Cooling tower:3640	3770×3490
Standard condition: Dry bulb temperature is 33℃ and water inlet temperature is 20℃.

  Company Information     Our Services

Perfect service system:   All Focusun ice machines come out with 15 months full warranty. If the machine breaks down in 15 months.  Focusun will send the parts for free, even send the technician over if situation needed.  When beyond the warranty, Focusun will supply the parts and service only for factory cost.
Process:	Please provide the copy of Sales Contract and describe the problems appeared.
Problems confrimation:
Slight problem:	Please send the proof to our After-Sales Department, we will reply within two days.
Serious problem:
A	We will dispatch our Quality and Problems Appraisers to make a confirmation.
B	Have a negotiation of the compensation and sign agreements
C	Our After-Sales Department will perform the duties as the agreement

   Certificates we have:  

Contact us if you need more details on Plate ice machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about ice plate making machine、plate ice maker. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Plate Ice Machine