Find Gas Generation Equipment & Parts, Cold Room, Auto Winch on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)

The Latest Product Alerts Send Me

Home > Products > Cold storage board > XPS Extruded Polystyrene Board

XPS Extruded Polystyrene Board

XPS Extruded Polystyrene Board

    Transportation: Ocean,Land,Air,Express,Others
    Port: Qingdao,Tianjin,Shanghai

Product Description

XPS Extruded Polystyrene Board

Product introduction:

The full name of XPS (extruded polystyrene) is extruded polystyrene foam.

It is a rigid foam board made of polystyrene resin as raw material plus other raw materials and polymers, heated and mixed while injecting the catalyst, and then extruded and molded. Its scientific name is extruded polystyrene foam for heat insulation (XPS for short). XPS has a perfect closed-cell honeycomb structure. This structure allows XPS boards to have extremely low water absorption (almost no water absorption), low thermal conductivity, high compression resistance, and aging resistance ( There is almost no aging decomposition phenomenon under normal use).

Yu Ou Nuo Xps Extruded Polystyrene is used for building roof insulation, steel structure roof, building wall insulation, building ground moisture, square ground, ground frost heave control, central air conditioning ventilation pipe, airport runway insulation layer, high-speed railway subgrade, etc.

Application scope of Xps Insulation Sheet:

building roof insulation, steel structure roof, building wall insulation, building ground moisture, square ground, ground frost heave control, central air conditioning ventilation pipe, airport runway insulation layer, high-speed railway subgrade, etc.

XPS Extruded Polystyrene

Performance advantages of extruded board:

1. Excellent thermal insulation

Extruded Polystyrene Foam Board has the characteristics of high thermal resistance, low linearity and low expansion ratio. The closed cell rate of its structure reaches more than 99%, forming a vacuum layer, avoiding air flow and heat dissipation, and ensuring the durability and stability of its thermal insulation performance. Compared with 80% closed cell rate of foamed polyurethane, its advantages are obvious. Practice has proved that the insulation effect of 20 mm thick XPS extruded insulation board is equivalent to 50 mm thick expanded polystyrene and 120 mm thick cement perlite. Therefore, this material is a good choice for building insulation at present.

2. Excellent high strength and compression resistance

Due to the special structure of Xps Foam Board Heat Insulation, its compressive strength is very high and its impact resistance is very strong. According to the different types and thickness of XPS, its compressive strength can reach 150-500kpa or more, and it can bear the ground load of various systems. It is widely used in geothermal engineering, motorway, airport runway, square ground, large cold storage, decoration and thermal insulation in the cars and other fields.

3. High quality hydrophobicity and moisture-proof

Water absorption is an important parameter to measure thermal insulation materials. After absorbing water, the thermal insulation performance of the insulation material decreases. At low temperature, the inhaled water is easy to freeze, which destroys the structure of the insulation material, thus reducing the compression resistance and thermal insulation performance of the plate. Because the molecular structure of polystyrene itself does not absorb water, the molecular structure of the board is stable and there is no gap, it solves the problems of water leakage, penetration, frosting and condensation of other materials.

4. Light and easy to use

The chemical structure of the full closed cell foaming and its honeycomb physical structure of XPS board make it light and high-strength, easy to cut and transport, and not easy to damage, and easy to install.

5. Good stability and corrosion resistance

In long-term use, it does not age, decompose, or produce harmful substances. Its chemical properties are extremely stable, and it will not be degraded due to water absorption and corrosion, and its performance will not be reduced. It can still maintain its superior performance in high temperature environments.

6. Product environmental performance

Xps Extruded Polystyrene Foam Insulation Board has been tested by the relevant national departments. It has stable chemical properties, no volatilization of harmful substances and no harm to human body.The production raw materials adopt environmentally friendly materials and do not produce any industrial pollution. This product is an environmentally friendly building material.

Zhengzhou Ou Nuo Building Materials Co., Ltd.

 Zhengzhou Ou Nuo Building Materials Co., Ltd. is located in Zhengzhou, a transportation hub city in China. It is a large enterprise approved by the General Administration of Industry and Commerce of China, with independent R & D capability and integrating product R & D, production, promotion, sales and after-sales service. We specialize in the production of rock wool board products (basalt rock wool board for exterior wall, roof rock wool board, fireproof rock wool board, firebreak belt, rock wool board for glass curtain wall, hanging stone rock wool board, rock wool pipe), extruded polystyrene board products (B1 extruded polystyrene board for exterior wall, floor heating extruded polystyrene board), and form a complete set of procurement, marketing, after-sales and management mode. After years of hard work and continuous innovation, the company has established a good cooperative relationship with many well-known domestic enterprises. With the product strategic concept of honesty and trustworthiness, steady pace and long-term vision, Ou Nuo thermal insulation aims to build a brand advantage, establish brand image, take product quality as the basis and customer satisfaction as the principle, and strive to build the company into a sustainable and vitality enterprise. Dedicated to improve and innovate constantly, we are willing to achieve cooperation with the majority of new and old customers with high-quality service!

Company Info

  • Company Name: Zhengzhou Ou Nuo Building Materials Co., Ltd.
  • Representative: Lu Fangfang
  • Product/Service: Rock Wool Board Series , Steel Plate Series , Rock Wool Composite Board Series , Extruded Board Series , Rock Wool Pipe Series , Rubber Plastic Insulation Material Series
  • Capital (Million US $): 3,000,000RMB
  • Year Established: 2014
  • Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
  • Export Percentage: 21% - 30%
  • Total Annual Purchase Volume (Million US $): US$2.5 Million - US$5 Million
  • No. of Production Lines: 3
  • No. of R&D Staff: 11 -20 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 5,000-10,000 square meters
  • Factory Location: 中国河南省郑州市新郑市八千
  • Contact Person: Ms. Bella Lu
  • Tel: +86-0371-15803837401
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters